Lyman Mold #311291

View previous topic View next topic Go down

Lyman Mold #311291

Post by Rick459 on Tue Jul 19, 2011 10:27 pm

Target 50 yds. powder Unique 14.0 grns. rifle Win Mod 70 30/06 five shot group. first time shooting this bullet and this truly amazed me. bullet was cast of #2 lyman.
Rick
avatar
Rick459
Member
Member

Posts : 146
Join date : 2011-04-30
Age : 68
Location : So.Cal

Back to top Go down

Re: Lyman Mold #311291

Post by kcatto on Wed Jul 20, 2011 11:49 am

extremely nice group.... I will be curious to see what happens when you push it out to 100yrds or more....
avatar
kcatto
Member
Member

Posts : 648
Join date : 2010-11-15
Age : 45
Location : Oklahoma

Back to top Go down

Re: Lyman Mold #311291

Post by Rick459 on Thu Jul 21, 2011 10:02 pm

tomorrow if all goes well i will be heading out to the rangeand just for you kcatto i will put the targets out at 100 yds. and post the results for you. all rounds were loaded on a Forster Co-Ax press using the seater die from my Lee collet die set with a light crimp using a Lee regular seat crimp die with seater plug removed. also when i sized the cases i pulled the expander ball from my Forster Fl sizing die and used the Lyman M die to open up the neck and also flare the case mouth.
Rick
avatar
Rick459
Member
Member

Posts : 146
Join date : 2011-04-30
Age : 68
Location : So.Cal

Back to top Go down

Re: Lyman Mold #311291

Post by kcatto on Fri Jul 22, 2011 1:24 am

Nice i cannot wait to see the results at 100yrds.... if it continues to be this good I see a new mold in my future.... I have never shot cast through my 30-06...
avatar
kcatto
Member
Member

Posts : 648
Join date : 2010-11-15
Age : 45
Location : Oklahoma

Back to top Go down

Re: Lyman Mold #311291

Post by Rick459 on Tue Aug 02, 2011 9:44 pm

seeing how these bullets aren't shooting too good with conventional lube i am moving to plan B. which is now i will Moly coat these lead bullets and see if yhis will help. if it works out i can then shoot lead or jacketed Moly coated bullets and still only have to just use a patch with Ed's Red to clean up the bore. friday will tell if this will be so. with these lead i Moly then size and crimp the gas check then Moly again to coat the gas check. these are waiting for the second coating.
avatar
Rick459
Member
Member

Posts : 146
Join date : 2011-04-30
Age : 68
Location : So.Cal

Back to top Go down

Re: Lyman Mold #311291

Post by kcatto on Wed Aug 03, 2011 4:22 am

we are waiting for nothing but success!!! nice gas checks too....
avatar
kcatto
Member
Member

Posts : 648
Join date : 2010-11-15
Age : 45
Location : Oklahoma

Back to top Go down

Re: Lyman Mold #311291

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum